Solar panels without frame

Solar panels without a frame can simply be glued or screwed directly onto the surface. On a stable base and flat mounting, the solar panels without a frame can even be walked on. A mounting system is not necessary! In addition, the solar panels are particularly light and therefore ideal for vans, campers, caravans or camper vans. Since the solar panels without a frame are extremely flat, the structure will not increase, there will not be a tripping edge and no driving or air noises will be generated.

The solar panels are very robust, absolutely weather and salt water resistant. Proven quality for over 20 years on sailing boats, yachts, sea marks and much more.

SOLARA Solarmodule ohne Rahmen

You can find solar panels with frames on our website “Solar panels with frames”

Solar panels with frame provide a simple installation with SOLARA mounting systems or other structures. The stable aluminium frame of the solar panels from SOLARA is very robust, absolutely weather and salt water-resistant. The frame gives the solar panel the necessary stability with free and ventilated installation and protects against mechanical loads such as wind, snow, etc.

SOLARA Solarmodule mit Rahmen

Mobile solar panels, light and foldable can be found on our page “Solar modules mobile series”

The SOLARA solar panels of the Power Mobil series are used wherever a permanent installation is not possible. Ideal for campers, mobile homes, vans and caravans, but of course also on boats and sailing yachts. In remote areas of the world, on expeditions and adventure tours, these SOLARA solar panels are used for independent power generation.

SOLARA Power Mobil Serie am Strand

SOLARA offers a wide selection – nine different solar modules without frames in two frameless solar module series.

SOLARA M-Series

SOLARA M-Serie

Large selection – The SOLARA classics since 20 years – more »

SOLARA Power M-Series

SOLARA Power M-Serie

Top-of-the-range solar products – maximum performance in the smallest of spaces more »

Here is an overview of all solar panels with frames from SOLARA

Here in the table and with all details in our catalogue for download – click here!

Solar panel series Type Average daily yield in summer (Wh/d) Nominal capacity (Wp) Dimensions More details
SOLARA M-Series S50P36 50 15 431x243x4 More »
SOLARA M-Series S140P42 140 35 464x481x4 More »
SOLARA M-Series S200P43 200 50 654x481x4 More »
SOLARA M-Series S280P43 280 70 844x481x4 More »
SOLARA M-Series S400P41 400 100 798x695x4 More »
SOLARA Power M-Series S555M34 555 125 990x660x4 More »
SOLARA Power M-Series S515M31 515 115 1120x545x4 More »
SOLARA Power M-Series S575M35 575 130 1250x545x4 More »
SOLARA Power M-Series S705M43 705 160 1510x545x4 More »
DCsolar Power Flex E485M31 flex 485 110 110x540x4 More »
DCsolar Power Flex E525M34 flex 525 120 1375x540x4 More »
DCsolar Power Flex E615M39 flex 615 140 1375x540x4 More »

Top quality made in Germany

Solar modules from SOLARA – all tests passed

SOLARA solar panels are used wherever there is no reliable power supply available: on motorhomes, caravans, mobile homes, vans and campers, as well as sailboats and yachts. Often also in remote areas of the world and at sea. In technical facilities, traffic control and telecommunication systems, SOLARA solar systems are used for off-grid power generation.

Solar panels from SOLARA are designed in such a way that they can withstand larger climatic loads without any problems. They are extremely robust, flexible in use and make optimal use of unfavorable lighting conditions for energy generation.

SOLARA Qualitätsprüfungen fertiger Solarmodule

Quality tests of manufactured solar modules in the laboratory of SOLARA solar module production - the basis of our top quality Made in Germany

SOLARA Solarmodulfabrik

Laboratory in the SOLARA solar module factory for checking the material quality before processing

Laboratory in the SOLARA solar module factory for checking the material quality before processing To ensure the quality and performance of the SOLARA product range, the modules are manufactured in Germany. Every solar panel is tested and certified according to strict quality standards under ISO conditions. After completion, each solar panel is individually measured under internationally recognised STC conditions and registered using an unchangeable serial number.

CERTIFICATIONS AND TESTS

SOLARA solar technology is tested under the harshest conditions. The solar panels meet international standards and tests. The solar panels from SOLARA have also successfully passed all of the following tests for over 20 years.

  • Mechanical stress tests
  • Weather resistance of the cell embedding
  • Climate test of the entire module
  • Salt water resistance test
  • Degradation test
  • Test for micro-defects in the cells
  • Stability of the solder connections
  • In-house tests in our own facilities

SOLARA solar panels – Top quality made in Germany since 20 years

  • High quality of service before and after purchase
  • High yields and long-term guarantees
  • High- quality additional components from premium manufacturers
  • Best material quality and processing
Logo Quality made in Germany

SOLARA M-SERIES

Solar panels extremely flat, accessible and semi-flexible

SOLARA M-Serie

Extremely flat, walable and semi-felxible

  • Stability and maximum heat dissipation due to innovative aluminium-sandwich support plate
  • Additional solar cells for efficient charging
  • All of the materials can withstand extreme heat,high humidity, sea and saltwater
  • Teflon-type extremely resistant protective film on front and back
  • Flat, glued and screwed cable outlet with strain relief
  • Cell protector with external protection diodes included
  • Cable lead-through already prepared in the carrier plate
  • 5-year product warranty. Warranty conditions on this homepage under Download.

Used materials

Cell technology Monocrystalline cells
Front and back ETFE front and back foil, welded at the edge
Cable outlet Solid, small, flat, seawater-tight, glued and screwed
Hotspot-protector (external) Enclosed with S200M43, S280P43 and S400M41
SOLARA M-Serie - Collage

SOLARA M (marine) solar panels have proven themselves on all oceans for over 20 years

Long service life even under extreme conditions

  • Maximum daily yield through additional single cells
  • Extremely high yields through the use of high performance crystalline cells
  • Profitable in every season, even on cloudy days
  • External hotspot-protector with bypass diodes to prevent possible cell overheating is included
Type S50P36 S140P42 S200M43 S280M43 S400M41
Average daily yield in summer Wh/d 50 140 200 280 400
Nominal capacity (Pmpp) Wp* 15 35 50 70 100
Dimensions (L x W x H) mm 431 x 243 x 4 464 x 481 x 4 654 x 481 x 4 844 x 481 x 4 798 x 695 x 4
Weight kg 0.9 1.7 2.2 2.8 3.7

SOLARA POWER M-SERIES

High performance solar panels in the smallest of spaces

SOLARA Power M-Serie

Appearance and design

  • Elegant and attractive all-black design
  • Extremely flat panel construction with aluminium-sandwich support plate
  • Thanks to unique, innovative cell connectors a very flexible mounting is possible e.g. on the tarpaulin
  • Fully walkable
  • Cable entry already prepared directly through the support plate
  • Cable outlet optimally positioned for use on pop-up roofs
  • Flat, glued and screwed cable outlet with strain relief
  • 5-year product warranty. Warranty conditions on this homepage under Download.

Used materials

Cell technology Sunpower, monocrystalline with back contact
Front/
Back
ETFE front and back foil, welded at the edge
Cable outlet Solid, flat, seawater tight, glued and screwed
Hotspot-protector (external) Standard for all module types

Highest daily yield through back-contact Sunpower solar cells

  • Extremely high efficiency thanks to the use of monocrystalline cells with rear contact and over 23% efficiency
  • Increased voltage through additional solar cells
  • High yield in every season due to excellent low-light performance – even in diffused light
  • Developed and manufactured for permanent use at sea and on land
  • All of the materials can withstand extreme heat,high humidity, sea and saltwater
  • Equipped with UV-stable solar connection cable and seawater-proof cable outlet
  • External hotspot-protector with bypass diodes to prevent possible cell overheating is included
Type S555M34 S515M34 S575M35 S705M435
Average daily yield in summer Wh/d 555 515 575 705
Nominal capacity (Pmpp) Wp* 125 115 130 160
Dimension (LxWxH) mm 990 x 680 x 4 1120 x 545 x 4 1250 x 545 x 4 1510 x 545 x 4
Weight kg 4.2 3.6 4.4 5.2

DCsolar top-quality from SOLARA

SOLAR TECHNOLOGY IN TESTED QUALITY
More and more customers are demanding an inexpensive alternative in classic quality. Good and cheap SOLARA produces the DCsolar solar panels produced in Asia.

“EVEN IN THE ECONOMY CLASS YOU CAN FLY GOOD AND SAFE”
DCsolar solar panels are developed by SOLARA in Germany. Tested and certified production facilities in Asia produce DCsolar panels according to these specifications.

You have the choice: Premium quality made in Germany or DCsolar classic from Asia

DCSolar Logo

ATTRACTIVE COMPLETE SETS
DCsolar panels can be combined with all high-quality SOLARA mounting systems and charge controllers. The DCsolar complete sets in SOLARA quality have a very attractive price.

NEW: 3-YEAR WARRANTY
SOLARA grants a three-year product guarantee on DCsolar solar modules since February 2021. Another proof of quality and unique in this product group. Details of the warranty conditions can be found on this homepage under Download.

3 years product guarantee SOLARA

DCsolar Power Flex

SOLARA Solaranlagen - mobile Solarmodule

TOP PERFORMANCE – FOR HIGHEST DEMANDS

  • Semi-flexible solar module, stable due to a 1.2 mm aluminium support plate
  • Lightweight and fully walkable
  • Solar cells with up to 23 % efficiency
  • Fully encapsulated cells by bonding front and back side foils
  • Adapts to curved roof surface
  • Monocrystalline solar cells with high efficiency
  • Highest daily yields on the smallest surface even in low light conditions

Used materials

Cell technology Sunpower, monocrystalline with back-side contact
Front and back ETFE front and back foil, welded at the edge
Bypass diodes Integrated in cable outlet
Cable outlet 5m, 2×1.5 qmm
Type E485M31 flex E525M34 flex E615M39 flex
Average daily yield in summer Wh/d 485 525 615
Nominal capacity (Pmpp) Wp* 110 120 140
Short circuit current (Isc) A 6.10 6.10 6.19
Open circuit voltage (Uoc) V 22.3 24.5 28.1
Voltage (Umpp) V 19.2 21.1 24.2
Power (Impp) A 5.70 5.70 5.79
Number of cells 31 34 39
Logo - geprüfte DCsolar Qualität